The Course was added to your Curriculum Goals.

Shopping cart

Events

ENSER Locations


1 South Jersey/Philly	1902 Taylor's Lane Cinnaminson, NJ 08077 Phone: 856.829.5522 Fax: 856.829.5748
2 Charlotte NC	346 Crompton Street Charlotte, NC 28217 Phone: 704.588.8686 Fax: 704.588.5757
3 Orlando	11873 High Tech Ave Orlando, FL 32817 Phone: 407.381.9770
4 Ft. Lauderdale
5 Virginia Beach

Curriculum Goals

Courses

More Favorite <em>Courses</em>

Harris, Melbourne - "Just wanted to let you know that the Wildfire 2 training provided by Enser was outstanding. The feedback from the students was very positive."

NAVAIR Lakehurst - "Enser scored the highest evaluation from our trainees we've ever had. Their approach, material presentation, willingness to work with us and to adapt to our needs was first class. Enser is our #1 choice."

Lockheed, Moorestown - "We were totally new to Pro/E, after more than 20 years of drafting on boards and 2D, we were able to learn the system in one week. Thanks in large part to Enser's instructor, who was also a long time Pro/E User, we learned how to apply class lessons to our specific design requirements."

Modeling 3D Piping Designs with Pro/ENGINEER Wildfire 2.0

Start: 10/15/2007 - 5:16pm

Course Name:

Course Number:

TRN-989

Cost:

"$1,350"

Duration:

3 Days

Course Category:

Pro/ENGINEER Wildfire 2.0 Courses

Topics:

2-D schematic piping design using RSD, process overview.Piping 3-D design overview.Setting up for specification driven 3-D piping designs.Creating specification driven industrial 3-D piping designs.Creating non-specification driven mechanical 3-D piping designs.Drawing setup.Creating piping drawings.Outputting isometric information (ISOGEN).

Prerequisites:

Piping Engineers should 1st Creating 2-D Schematics with Routed Systems Designer course to gain a full understanding of the complete process and understand how the configuration of deliverables from Routed Systems Designer

objective:

The primary focus of this course is to learn how to create specification driven industrial piping designs using Pro/ENGINEER Wildfire 2.0. This includes learning how to use schematic diagrams created with Routed Systems Designer to drive 3-D industrial piping designs created within Pro/ENGINEER Wildfire 2.0. You also learn how to create non-specification driven mechanical piping designs using Pro/ENGINEER Wildfire 2.0.You learn how to document piping designs by creating drawings that include BOM tables, pipe bend tables, and engineering information. You also learn how to export ISOGEN format files for creating pipeline, spool and systems isometric drawings.At the end of each day, you will complete on-line learning assessments that reinforce your understanding of the course topics. These assessments also serve as the basis for daily instructor-led review discussions.After successfully completing the course, you will be able to create both specification driven and non-specification driven 3-D piping designs and associated manufacturing deliverables using Pro/ENGINEER Wildfire 2.0.

Participants:

This course is intended for engineers, involved in the 3-D routing of industrial piping systems and mechanical piping systems.