Shopping cart

Events

ENSER Locations


1 South Jersey/Philly	1902 Taylor's Lane Cinnaminson, NJ 08077 Phone: 856.829.5522 Fax: 856.829.5748
2 Charlotte NC	346 Crompton Street Charlotte, NC 28217 Phone: 704.588.8686 Fax: 704.588.5757
3 Orlando	11873 High Tech Ave Orlando, FL 32817 Phone: 407.381.9770
4 Ft. Lauderdale
5 Virginia Beach

Curriculum Goals

Courses

More Favorite <em>Courses</em>

Harris, Melbourne - "Just wanted to let you know that the Wildfire 2 training provided by Enser was outstanding. The feedback from the students was very positive."

NAVAIR Lakehurst - "Enser scored the highest evaluation from our trainees we've ever had. Their approach, material presentation, willingness to work with us and to adapt to our needs was first class. Enser is our #1 choice."

Lockheed, Moorestown - "We were totally new to Pro/E, after more than 20 years of drafting on boards and 2D, we were able to learn the system in one week. Thanks in large part to Enser's instructor, who was also a long time Pro/E User, we learned how to apply class lessons to our specific design requirements."

Creating 2-D Schematics with RSD 5.0 and Pro/ENGINEER Wildfire 2.0 Sept. 29th

Start: 09/29/2007 - 8:00am

End: 10/02/2007 - 5:00pm

Course Name:

Course Number:

TRN-1723

Cost:

$900

Duration:

2 Days

Course Category:

Pro/ENGINEER Wildfire 2.0 Courses

Topics:

Overview of the 2-D Schematic Design ProcessSetting up the DesignSetting up the Catalog LibraryCreating Block DiagramsCreating Circuit DiagramsCreating Wiring DiagramsCreating Process and Instrumentation Diagrams (P& ID)Communicating Diagram Information to Pro/ENGINEER WildfireCreating Reports and Other Information

Prerequisites:

None

objective:

"In this course you will learn how to use Routed Systems Designer (RSD) to create schematic diagrams for both electrical cabling and piping designs. You will learn how to create block diagrams to represent initial system designs. You will also learn how to create electrical circuit and wiring diagrams, and how to create Process and Instrumentation Diagrams (P& ID) for piping systems. Finally, you will learn how to use these diagrams to drive 3-D harness designs and industrial piping designs created within Pro/ENGINEER Wildfire.At the end of each day you will use Pro/FICIENCY to complete on-line learning assessments that reinforce your understanding of the course topics. These assessments also serve as the basis for daily instructor-led review discussions."

Participants:

"This course is intended for engineers, involved in the schematic 2-D layout of either electrical cabling diagrams or piping diagrams."

Price: $900.00