Shopping cart

Events

ENSER Locations


1 South Jersey/Philly	1902 Taylor's Lane Cinnaminson, NJ 08077 Phone: 856.829.5522 Fax: 856.829.5748
2 Charlotte NC	346 Crompton Street Charlotte, NC 28217 Phone: 704.588.8686 Fax: 704.588.5757
3 Orlando	11873 High Tech Ave Orlando, FL 32817 Phone: 407.381.9770
4 Ft. Lauderdale
5 Virginia Beach

Curriculum Goals

Courses

More Favorite <em>Courses</em>

Harris, Melbourne - "Just wanted to let you know that the Wildfire 2 training provided by Enser was outstanding. The feedback from the students was very positive."

NAVAIR Lakehurst - "Enser scored the highest evaluation from our trainees we've ever had. Their approach, material presentation, willingness to work with us and to adapt to our needs was first class. Enser is our #1 choice."

Lockheed, Moorestown - "We were totally new to Pro/E, after more than 20 years of drafting on boards and 2D, we were able to learn the system in one week. Thanks in large part to Enser's instructor, who was also a long time Pro/E User, we learned how to apply class lessons to our specific design requirements."

Advanced Part Modeling with Pro/ENGINEER Wildfire 2.0

Start: 12/08/2007 - 9:00am

End: 12/09/2007 - 5:00pm

Course Name:

Course Number:

TRN-1713

Cost:

$900

Duration:

2 Days

Course Category:

Pro/ENGINEER Wildfire 2.0 Courses

Topics:

Creating sketch-based features using advanced sketching techniques such as conics, splines, and elliptical fillets.Creating advanced finishing features such as rounds, chamfers and drafts.Creating advanced sweeps and blends.Creating solid geometry using surfaces and curves.Reusing design geometry with inheritance and user-defined features (UDF).Performing advanced component operations and duplicating features and components using pattern tables.Creating styled and warp features.Creating analysis features and conducting feasibility and optimization design studies.

Prerequisites:

Fast Track to Pro/ENGINEER Wildfire 2.0, Pro/ENGINEER Wildfire 2.0 Update

objective:

This course teaches you how to use advanced part modeling techniques in Pro/ENGINEER Wildfire 2.0 to improve your product designs. You will learn how to create and modify design models using advanced sketching techniques and feature creation tools. You will learn how to reuse existing design geometry when creating new design models. You will also learn how to analyze and optimize design models to conform to design specifications.After completing this advanced course you will be well prepared to work efficiently with complex product designs using Pro/ENGINEER Wildfire 2.0.At the end of each day, you use the Pro/FICIENCY skills assessments to reinforce your understanding of the course topics. Your instructor utilizes the results from the anonymous skills assessments as the basis for daily review sessions.

Participants:

This course is intended for Design Engineers.