Shopping cart

Events

ENSER Locations


1 South Jersey/Philly	1902 Taylor's Lane Cinnaminson, NJ 08077 Phone: 856.829.5522 Fax: 856.829.5748
2 Charlotte NC	346 Crompton Street Charlotte, NC 28217 Phone: 704.588.8686 Fax: 704.588.5757
3 Orlando	11873 High Tech Ave Orlando, FL 32817 Phone: 407.381.9770
4 Ft. Lauderdale
5 Virginia Beach

Curriculum Goals

Courses

More Favorite <em>Courses</em>

Harris, Melbourne - "Just wanted to let you know that the Wildfire 2 training provided by Enser was outstanding. The feedback from the students was very positive."

NAVAIR Lakehurst - "Enser scored the highest evaluation from our trainees we've ever had. Their approach, material presentation, willingness to work with us and to adapt to our needs was first class. Enser is our #1 choice."

Lockheed, Moorestown - "We were totally new to Pro/E, after more than 20 years of drafting on boards and 2D, we were able to learn the system in one week. Thanks in large part to Enser's instructor, who was also a long time Pro/E User, we learned how to apply class lessons to our specific design requirements."

Cabling using Pro/ENGINEER Wildfire 3.0

Start: 10/16/2007 - 1:27pm

Course Name:

Course Number:

TRN-1849-T

Cost:

$1,350

Duration:

3 days

Course Category:

Pro/ENGINEER Wildfire 3.0 Courses

Prerequisites:

Introduction to Pro/ENGINEER Wildfire 3.0, Creating Schematics Usinf RSD 6.0 (Recommended)

objective:

In this course, you learn how to create 3-D electrical harnesses using Pro/ENGINEER Wildfire 3.0. This includes using schematic diagrams created with Routed Systems Designer 6.0 to pass information into 3-D harness designs created within Pro/ENGINEER Wildfire 3.0. You learn how to route electrical harnesses, create flattened harnesses for manufacturing, and document harness designs by creating flattened harness drawings that include customized BOM tables and wire list information. After successfully completing the course, you will be able to create 3-D electrical harnesses and associated manufacturing deliverables using Pro/ENGINEER Wildfire 3.0. It is strongly recommended that cabling engineers attend this course and the Introduction to Routed Systems Designer 6.0 for Pro/ENGINEER Wildfire 3.0 course. This will enable a full understanding of the complete process and an understanding of how the configuration of deliverables from RSD such as wiring diagrams provide essential input for creating electrical harness assemblies in Pro/ENGINEER Wildfire 3.0.

Participants:

This course is intended for engineers, involved in the 3-D routing of electrical cabling, wire harnesses, and related roles.