Shopping cart

Events

ENSER Locations


1 South Jersey/Philly	1902 Taylor's Lane Cinnaminson, NJ 08077 Phone: 856.829.5522 Fax: 856.829.5748
2 Charlotte NC	346 Crompton Street Charlotte, NC 28217 Phone: 704.588.8686 Fax: 704.588.5757
3 Orlando	11873 High Tech Ave Orlando, FL 32817 Phone: 407.381.9770
4 Ft. Lauderdale
5 Virginia Beach

Curriculum Goals

Courses

More Favorite <em>Courses</em>

Harris, Melbourne - "Just wanted to let you know that the Wildfire 2 training provided by Enser was outstanding. The feedback from the students was very positive."

NAVAIR Lakehurst - "Enser scored the highest evaluation from our trainees we've ever had. Their approach, material presentation, willingness to work with us and to adapt to our needs was first class. Enser is our #1 choice."

Lockheed, Moorestown - "We were totally new to Pro/E, after more than 20 years of drafting on boards and 2D, we were able to learn the system in one week. Thanks in large part to Enser's instructor, who was also a long time Pro/E User, we learned how to apply class lessons to our specific design requirements."

Sheetmetal Design using Pro/ENGINEER Wildfire 4.0

Start: 04/23/2009 - 1:50pm

Course Name:

Course Number:

TRN-2177

Cost:

900.00

Duration:

2 Days

Course Category:

Pro/ENGINEER Wildfire 4.0 Courses

Topics:

The Sheetmetal Design Process. Sheetmetal Model Creation, Conversion, and Display. Methods of Developed Length. Calculation. Primary Wall Features. Secondary Wall Features. Partial Walls. Bend Relief. Unbend and Bend Back Features. Sheetmetal Bend Features. Flat Patterns. Sheetmetal Cuts. Forms. Notch and Punch Features. Sheetmetal Environment Setup. Sheetmetal Design Information Tools. Sheetmetal Design Rules. Detailing Sheetmetal Designs. Sheetmetal Design Project.

Prerequisites:

Successful completion of T2169 - Introduction to Pro/ENGINEER Wildfire 4.0 or equivalent experience.

objective:

Sheetmetal Design using Pro/ENGINEER Wildfire 4.0 is a comprehensive training course that teaches you how to create sheetmetal parts in Pro/ENGINEER. The course builds upon the basic lessons you learned in Introduction to Pro/ENGINEER Wildfire 4.0 and serves as the second stage of learning. In this course, you will learn how to design sheetmetal parts and assemblies, including sheetmetal production drawings. All the functions needed to create sheetmetal parts, drawings, and assemblies are covered. Upon completion of this course, you will be able to create sheetmetal design models, create the flat state of the model, and document both in production drawings.

Participants:

This course is intended for design engineers, mechanical designers, and industrial designers. People in related roles can also benefit from taking this course.

Price: $0.00