Shopping cart

Events

ENSER Locations


1 South Jersey/Philly	1902 Taylor's Lane Cinnaminson, NJ 08077 Phone: 856.829.5522 Fax: 856.829.5748
2 Charlotte NC	346 Crompton Street Charlotte, NC 28217 Phone: 704.588.8686 Fax: 704.588.5757
3 Orlando	11873 High Tech Ave Orlando, FL 32817 Phone: 407.381.9770
4 Ft. Lauderdale
5 Virginia Beach

Curriculum Goals

Courses

More Favorite <em>Courses</em>

Harris, Melbourne - "Just wanted to let you know that the Wildfire 2 training provided by Enser was outstanding. The feedback from the students was very positive."

NAVAIR Lakehurst - "Enser scored the highest evaluation from our trainees we've ever had. Their approach, material presentation, willingness to work with us and to adapt to our needs was first class. Enser is our #1 choice."

Lockheed, Moorestown - "We were totally new to Pro/E, after more than 20 years of drafting on boards and 2D, we were able to learn the system in one week. Thanks in large part to Enser's instructor, who was also a long time Pro/E User, we learned how to apply class lessons to our specific design requirements."

Surfacing using Pro/ENGINEER Wildfire 4.0 - Mar. 29th 1 South Jersey/Philly

Start: 03/29/2010 - 9:00am

End: 03/31/2010 - 5:00pm

Course Name:

Surfacing using Pro/ENGINEER Wildfire 4.0 - Mar. 29th

Course Number:

TRN-2176–T

Cost:

$1350.00

Duration:

3 Days

Course Category:

Pro/ENGINEER Wildfire 4.0 Courses

Topics:

Describe surface modeling and its terminology. Learn advanced selection techniques. Create advanced datum features. Use advanced sketching techniques. Learn basic surfacing tools. Create various boundary surfaces. Create variable section sweep surfaces. Create helical sweep surfaces. Create swept blend surfaces. Utilize surface analysis tools. Extend and trim surfaces. Manipulate surfaces. Create and edit solid models using surface quilts. Utilize the master model technique.

Prerequisites:

Introduction to Pro/ENGINEER Wildfire 4.0 - Pro/ENGINEER Wildfire 4.0 Update from Pro/ENGINEER Wildfire 3.0.

objective:

The Surface Modeling with Pro/ENGINEER Wildfire 4.0 training course teaches you how to use surface modeling in Pro/ENGINEER Wildfire 4.0 to create models with shapes that are too complex for solid features. In this course, you will learn how to use various techniques to create complex surfaces with tangent and curvature continuities. You will also learn how manipulate surfaces using editing tools, and analyze surfaces for quality and desired characteristics. In addition you will learn how to create solid features using the surfaces as references. Pro/FICIENCY assessments will be provided in order for you to assess your understanding of the course materials. The assessment results will also identify the class topics that require further review. At the end of the class, you will either take an assessment via your PTC University account, or your instructor will provide training on how to do this after the class. After completing this course, you will be well prepared to create complex shaped models using surfaces in Pro/ENGINEER Wildfire 4.0.

Participants:

This course is intended for mechanical designers, design engineers, industrial designers, and related roles. The topics in this course are also available as Web-based training courses.

Course Location:

1 South Jersey/Philly

Price: $1,350.00