The Course was added to your Curriculum Goals.

Shopping cart

Events

ENSER Locations


1 South Jersey/Philly	1902 Taylor's Lane Cinnaminson, NJ 08077 Phone: 856.829.5522 Fax: 856.829.5748
2 Charlotte NC	346 Crompton Street Charlotte, NC 28217 Phone: 704.588.8686 Fax: 704.588.5757
3 Orlando	11873 High Tech Ave Orlando, FL 32817 Phone: 407.381.9770
4 Ft. Lauderdale
5 Virginia Beach

Curriculum Goals

Courses

More Favorite <em>Courses</em>

Harris, Melbourne - "Just wanted to let you know that the Wildfire 2 training provided by Enser was outstanding. The feedback from the students was very positive."

NAVAIR Lakehurst - "Enser scored the highest evaluation from our trainees we've ever had. Their approach, material presentation, willingness to work with us and to adapt to our needs was first class. Enser is our #1 choice."

Lockheed, Moorestown - "We were totally new to Pro/E, after more than 20 years of drafting on boards and 2D, we were able to learn the system in one week. Thanks in large part to Enser's instructor, who was also a long time Pro/E User, we learned how to apply class lessons to our specific design requirements."

Mold Design using Pro/ENGINEER Wildfire 4.0

Start: 05/06/2009 - 9:00am

End: 05/07/2009 - 5:00pm

Course Name:

Course Number:

TRN-2179–T

Cost:

$900

Duration:

2 Day

Course Category:

Pro/ENGINEER Wildfire 4.0 Courses

Topics:

Learn the basic mold process. Prepare design models for the mold process. Analyze design models to ensure their readiness for molding. Create mold models. Apply shrinkage to the reference model. Create and assemble workpieces into the mold model. Create mold volumes. Create parting lines and parting surfaces. Split mold volumes. Extract mold components. Create mold features. Learn how to fill and open the mold.

Prerequisites:

Introduction to Pro/ENGINEER Wildfire 4.0. Basic understanding of industry standard Mold design terminology and processes. Knowledge of Pro/ENGINEER surfacing techniques a plus.

objective:

Pro/MOLDESIGN provides the tools to create a mold model from start to finish by using the mold design process within Pro/ENGINEER Wildfire 4.0. In this course, you will learn how to create, modify, and analyze mold components and assemblies. Any changes made to the design model automatically propagate to the mold components and assemblies. You will learn how to create final extract components that reflect the geometry of the design model, along with shrinkage considerations, adequate drafting, mold features, and cooling systems. Pro/FICIENCY assessments are provided for you to assess your understanding of the course materials. The assessment results also identify the class topics that require further review. At the end of the class, you will either take an assessment via your PTC University account, or your instructor will provide training on how to do this after the class. After completing the course, you will have a better understanding of the mold design process and how to create molded products by using the mold design process.

Participants:

This course is intended for designers, machinists, and manufacturing engineers. The topics in this course are also available as a Web-based training course.

Price: $900.00