The Course was added to your Curriculum Goals.

Shopping cart

Events

ENSER Locations


1 South Jersey/Philly	1902 Taylor's Lane Cinnaminson, NJ 08077 Phone: 856.829.5522 Fax: 856.829.5748
2 Charlotte NC	346 Crompton Street Charlotte, NC 28217 Phone: 704.588.8686 Fax: 704.588.5757
3 Orlando	11873 High Tech Ave Orlando, FL 32817 Phone: 407.381.9770
4 Ft. Lauderdale
5 Virginia Beach

Curriculum Goals

Courses

More Favorite <em>Courses</em>

Harris, Melbourne - "Just wanted to let you know that the Wildfire 2 training provided by Enser was outstanding. The feedback from the students was very positive."

NAVAIR Lakehurst - "Enser scored the highest evaluation from our trainees we've ever had. Their approach, material presentation, willingness to work with us and to adapt to our needs was first class. Enser is our #1 choice."

Lockheed, Moorestown - "We were totally new to Pro/E, after more than 20 years of drafting on boards and 2D, we were able to learn the system in one week. Thanks in large part to Enser's instructor, who was also a long time Pro/E User, we learned how to apply class lessons to our specific design requirements."

Surface Modeling with Pro/ENGINEER Wildfire 3.0 - May 11th - Guaranteed 2 Charlotte NC

Start: 05/11/2010 - 9:00am

End: 05/13/2010 - 5:00pm

Course Name:

Surface Modeling with Pro/ENGINEER Wildfire 3.0 - May 11th - Guaranteed

Course Number:

TRN-1832-T

Cost:

$1,350

Duration:

3 days

Course Category:

Pro/ENGINEER Wildfire 3.0 Courses

Topics:

Creating basic surfaces using techniques such as Extrude, Revolve, Sweeps and Blends. Understanding the surface modeling workflow. Creating a network of curves using various techniques such as through points and sketches. Creating surfaces using a network of curves as boundaries. Creating surfaces using variable section sweep and swept blend techniques. Creating surfaces using advanced blend tools such as Section to Surface, Surface to Surface andTangent to Surface. Using analysis tools to check for surface quality and potential problems. Manipulating surfaces using various editing tools such as Extend, Merge, Trim and Offset. Creating and editing solids using surfaces and quilts.

Prerequisites:

Pro/ENGINEER Wildfire 3.0 Update training, Introduction to Pro/ENGINEER Wildfire 3.0

objective:

In Pro/ENGINEER Wildfire 3.0, you can use surface modeling to create design models with shapes that are too complex for solid features. In this course, you learn how to use various techniques to create complex surfaces with tangent and curvature continuities. You can then create solids using the surfaces as references. You will also learn how to analyze surfaces for quality as well as manipulate surfaces using the various editing tools available in Pro/ENGINEER Wildfire 3.0.After completing this course, you will be well prepared to create complexly shaped design models using surfaces in Pro/ENGINEER Wildfire 3.0.At the end of each day, you use the Pro/FICIENCY skills assessments to reinforce your understanding of the course topics. Your instructor utilizes the results from the anonymous skills assessments as the basis for daily review sessions.

Participants:

Design engineers, mechanical designers, and industrial designers

Course Location:

2 Charlotte NC

Price: $1,350.00